Type: Cement-based adhesive for large ceramic wall and floor tiles.
Application: Suitable for both interior and exterior use.
Features:
- Superior flexibility and high initial grab.
- Supports even the heaviest wall tiles.
Composition:
- Contains Portland cement, fine graded sand, fillers, and chemical additives.
- High organic polymer content for enhanced bonding.
Preparation:
- Ensure surfaces are clean, free of debris, and moisture-prepped.
Mixing Instructions:
- Mix with approximately 25% water by weight.
- Use a mechanical mixer or electrical hand stirrer.
- Allow mixture to stand for 5-10 minutes before use.
- Use mixed mortar within 45 minutes.
Application:
- Apply 3-5 mm thick with a notched trowel.
- Tile surfaces must fully contact adhesive.
- Do not spread more than 1 square meter at a time.
- Wait at least 24 hours before grouting.
Grouting:
- Begin grouting after 2 days using SALI TILE GROUT for best results.
Packaging:
- Available in 20 kg and 25 kg plastic bags.
Storage:
- Store in a dry, covered area.
- Unopened bags have a 12-month shelf life.
Safety:
- Use protective gear like rubber gloves, dust mask, and safety glasses.
- Rinse eyes with water if contact occurs; seek medical help.
Technical Assistance:
- Consult SALINA technical office for product usage advice.
