Experience unparalleled performance and reliability with EuroTile CTA 608, a specially formulated premium grade cementitious flexible adhesive designed for both absorbent and non-absorbent tile and stone installations. This innovative adhesive contains a blend of high-grade polymers, silica, fillers, fibers, and special additives, ensuring superior bonding strength and durability. Meeting the stringent classifications of C2TE S1 according to EN 12004, EuroTile CTA 608 offers improved slip resistance, extended open time, and exceptional deformability, making it the ideal choice for a wide range of tiling projects.
Uses:
- Fixing of non-absorbent materials such as porcelain tiles, mosaics, marbles, artificial stones, and natural stones on interior and exterior surfaces.
- Ideal for installations in malls, utility areas, hospitals, and other high-traffic floor and wall tile projects.
- Suitable for tile installation on cork/rubber acoustic underlay systems.
- Compatible with gypsum board and silicate board substrates.
- Rated for heavy traffic conditions, ensuring long-lasting durability.
- Recommended for acoustic mat installation on cured screed/concrete surfaces.
- Formulated specifically for large size tiles and stones.
- Suitable for agglomerates and quartz stone installations.
- Supports Tile On Tile System without the need for a priming system.
- Excellent frost resistance, making it suitable for both exterior and interior applications.
- Suitable for use in both wet and non-wet areas, offering versatility in installation.
- Applicable for both external and internal tiling and stone applications.
Supports
- Concrete
- Sand cement screed
- Gypsum board
- Plywood
- Silicate board
- Cork/rubber
- Render
- And more.
Application
- Apply EuroTile CTA mortar uniformly at a thickness of 2-3 mm onto the substrate.
- Work on an area not exceeding 1 square meter at a time.
- For horizontal applications, utilize solid bed fixing for optimal results.
- For vertical applications, use a toothed trowel to comb horizontally and remove excess mortar.
- Implement a butter coat adhesive system to enhance bond strength.
- Ensure the trowel has 6 mm notches at 25 mm center-to-center spacing.
- Place the tile onto the applied mortar, pressing it firmly into place.
- Smooth out the tile carefully to ensure even distribution of mortar.
- Verify proper bonding by checking if the tile remains stationary without sliding.
| Advantages | Additional Information |
|---|---|
| Excellent water resistance | Rapidly sets and provides extended open time |
| Outstanding bond adhesion | Exhibits excellent flexibility and slip resistance |
| Exceptional bonding and compressive strength | Recommended for thicknesses up to 15 mm |
| Polymer content enhances adhesion and strength | Compatible with heated screeds and bonds with various substrates |
| Suitable for various construction materials | Cleans easily with water immediately after use |
| Can be stored for 12 months in unopened packs | |
| Supplied in 25 kg bags | |
| May contribute towards LEED credits | |
| Application Instructions | Surface Preparation |
| Surface should be sound, clean, and oil-free | Tiles should be clean, dry, and dust-free |
| Substrate should be soaked completely with water | |
| Mixing | Mixing Instructions |
| Mix with 6 liters of water for lump-free consistency | Optionally add EuroCreete AL 77 for better results |
| Allow to stand for a few minutes for resin dissolution | Mix for 2 minutes, pause, then mix for 2 more minutes |
| Use a forced action mixer for best results | Hand mixing suitable for small quantities, maintain powder/water ratio |
