EuroRepair FBR 710 Repair cement or chemical cement
AED28.00
Product Overview
Product Name: EuroRepair FBR 710
Type: Fibre Reinforced Structural Repair Mortar
Appearance: Granular grey powder
Packing: 25 kg Bag
Yield: 14.5 Ltr
Description
EuroRepair FBR 710 is a specially formulated, non-shrink, fiber-reinforced high-strength cementitious mortar designed for concrete and masonry repair. This product is ideal for use in vertical and overhead applications. It is highly effective in structural repair applications requiring superior chloride and carbon dioxide resistance.
Key Features
- Fibre Reinforced: Provides enhanced strength due to the inclusion of fibers and polymers.
- Superior Durability: Excellent resistance to chloride and carbon dioxide.
- Low Permeability: Weatherproof and water-resistant.
- Shrinkage Compensating: Helps to reduce cracking and deformation during drying.
- Excellent Adhesion Strength: Provides strong bonding to surfaces.
- Versatile: Suitable for use on marine structures, beams, sea walls, and more.
Uses
EuroRepair FBR 710 is suitable for:
- Repair of Damaged Concrete: Fixes cracked, spalled, chipped, or weak concrete surfaces.
- Vertical & Overhead Applications: Ideal for repairs on vertical surfaces and overhead areas up to 25mm.
- Heavy Concrete/Plaster Repair: Designed for heavy-duty repair works in marine structures and other exposed environments.
- Concrete Block & ALC/AAC Blocks: Effective on concrete blocks, plaster, and lightweight concrete blocks.
Applications include:
- Repairing damaged concrete surfaces, structural beams, sea walls, and marine structures.
- Filling wider joints.
- Repairing structural concrete/plaster areas exposed to extreme climatic conditions.
Technical Data
| Property | Value |
|---|---|
| Compressive Strength | >60 N/mm² (ASTM C 579) |
| Flexural Strength | >8 N/mm² at 28 days (BS 6319 Part 3) |
| Tensile Strength | 5.0 N/mm² at 28 days (BS 6319 Part 7) |
| Fire Resistance | 4 hours fire rated (ASTM 136) |
| Water Absorption | <3.0% |
| Fresh Wet Density | 2.05 ± 0.05 Kg/Ltr |
| Initial Setting Time | 2 hours at 35°C |
| Final Setting Time | 4 hours at 35°C |
| Grain Size | Up to 3 mm |
| VOC (Volatile Organic Compound) | Very Low |
Mixing Instructions
- Water Required: Approx. 4 L (16% by weight).
- Adjust the water content (±0.5 L) based on site conditions and application needs.
- Mix to a homogeneous consistency.
Surface Preparation
- Clean Surface: Ensure all surfaces are clean, free from grease, oil, or paint.
- Remove Damaged Concrete: Fully remove any debonded or damaged concrete.
- Apply Primer: Use EuroBond SBR 201 primer before applying EuroRepair FBR 710.
- Reinforcing Steel: For corroded steel, clean thoroughly and apply EuroClean RC 904 rust remover before priming.
Application Procedure
- After surface preparation, apply primer and allow at least 1 hour of standing time.
- Apply EuroRepair FBR 710 in layers, up to 50mm on horizontal surfaces, 25mm on vertical surfaces, and 20mm on overhead areas.
- Ensure no air pockets during application by using proper pouring methods (hand or pump).
- Curing: Use EUROBUILD Curing Compound for curing after application.
Precautions
- Temperature Range: Application should be done within the range of 5°C to 35°C. For temperatures outside this range, adjust by using hot or cold water as required and ensure proper protection for surfaces.
- Protective Gear: Wear gloves and goggles during handling. In case of skin or eye contact, rinse immediately with fresh water.
- Storage: Store in unopened bags in a cool, dry place. Shelf life is 12 months.
Health & Safety
- Handle with care and avoid direct contact with skin and eyes.
- In case of accidental ingestion, seek medical assistance immediately.
- Always follow the manufacturer’s safety instructions on the packaging.
Standards
- Conforms to:
- BS 1881, BS 6319 Part 3
- BS 6319 Part 7
- ASTM C 579
Complementary Products
- EuroBond SBR 201: Primer for improved bonding.
- EuroClean RC 904: Rust remover for steel.
- EUROBUILD Curing Compound: For proper curing.
